[DIY] The Solution to the Plug-In Motion Sensor Problem
On Sunday, May 16, 2004, at 22:34 US/Eastern, Temtrol Delta T. Inc, It's a pretty difficult DIY project that most DIYers don't have the skill to accomplish: you stick one of the two pieces on the wall and plug the other one into a 110v AC outlet. ;) Actually, it's really simple to install. Costs about $30; HeathZenith makes it. Right now I'm eight miles from the store, so don't have the model number; call the closest Home Depot and ask for electrical. All of our stores have it, and all the guy has to do is walk to the display and read off the number. With your no-wait hot-water recirculator, you'd probably want to use the receiver to trigger a relay that would switch the recirculator for two reasons: there's no ground through the receiver, and it's probably not large enough to trigger the recirculator by itself. It's made to switch lamps. -- --jmowreader