[DIY] Running Conduit (Was Re: Attaching 2x4 to Cinder Block)
Ok as far as bending the conduit, if you use minnerlacs to support the conduit then you wont need to bend it, it will be on the right level to go right into the metal boxes. You only need one conduit between wach box. You can run more than 2 wires in the 1/2 pipe. You dont really need a board behind the boxes, but if you are worried about moisture use plastic boxes. They are moisture proof. But if you do use a board behind then you will need to use the same thickness board behind each of the minnerlacs. HTH John
When we bought our house, there was a GE cooktop (built-in) and above it an exhaust fan. I feel cold drafts coming through the exhaust fan in the cold winter weather we're having. I don't use the exhaust fan much anyway. Any suggestions for what I should do? Is it unwise to just remove it? Or is there some device or energy-saving strategy that might help? Kelley Oklahoma City
It will, but a whole house fan will help more. They pull more air. -- --jmowreader